Gatelock Electric medium bedienbaar met tag via NFC

STEP 4: VERIFY THE RECEIVER PIN LINES UP WITH SLOT IN THE LOCK The gate lock needs to be level with the receiver STEP 5: DRILL HOLES ON THE POST AND ATTACH

Gatelock Electric medium bedienbaar met tag via NFC The FAAC V90 12V Electronic Gate Lock With Receiver Slot Plate comes with 2 keys and can be used for floor, ceiling, post or secondary gate mounting

STEP 4: VERIFY THE RECEIVER PIN LINES UP WITH SLOT IN THE LOCK The gate lock needs to be level with the receiver STEP 5: DRILL HOLES ON THE POST AND ATTACH

scatter slot machine Drill clearance hole in gate post to receive the latchbolt Slot this hole vertically to allow for gate sag

Then I did two dowels on the top and bottom of each slot and glued it all together Diy Gate Lock Design · Latch Gate Diy · Sliding Fence

gatelock slot Slot Veiligheid Elzette

I'm thinking of using a smaller square tubing to slide inside of the 1 12 I'm using for the doors I would cut a slot in the tube,drill and